裁切注意事项 Cut and cut notes 1.使用前，先请查看包装箱标签，核对型号、规格和颜色是否符合。 Before using, please check the packing label and check the type, specification and color. 2.作业环境：请在温度18～28℃（KE3100、KE5100可为8～30℃）、相对湿度30～60％的环境下放置24小时以上（贴膜和养护与此相同），并确保作业场所和工具的清洁。 2. The working environment: please in temperature 18 ~ 28 ℃ (KE3100, KE5100 for 8 ~ 30 ℃), 30 ~ 60% relative humidity environment 24 hours (sticker and maintained the same), and to ensure that the work sites and tools clean. 3.展开时膜面朝上、并防止工具或硬物碰擦。裁切高强级反光膜时，操作人员最好戴上丝质或棉质手套；用锋利刀刃以10°～30°角度一刀切断，以免切出毛边。裁切后膜面也朝上，放在平整、尺寸大于所裁切反光膜的平台上；有隧道现象时严禁使用。若不及时使用时，请套上塑料袋、扎紧，以防吸湿。叠放相同尺寸、相同形状的小面积反光膜时要控制其叠高，不压任何较重的物品。 Unfold the membrane facing up, and prevent the rubbing of tools or hard objects. When cutting the high and high quality reflective film, the operator should wear silk or cotton gloves. With a sharp blade to 10 ° to 30 ° Angle across the board, so as not to cut the burrs. After cutting, the surface of the film is also facing upward, and it is placed on a platform that is flat and larger than the shearing film. The use of tunnel is strictly prohibited. If not in time, please cover the plastic bag and tighten it to prevent moisture. When the same size and the same shape of the small area of the reflective membrane, control the high stack and not press any heavier items.